IBM 2179, User Manual

Page: 38 / 120

Inserting and removing a CD or DVD disc
To insert a disc:
1.
With the computer turned on, press the eject button. The tray slides
partway out of the drive. Manually pull the tray the rest of the way out.
2. Place the disc in the tray with the label facing up, and press the disc down
until it clicks into place and is held by the spring-loaded holders
1
.
3. Close the tray by gently pushing the tray closed. When the tray is closed,
the indicator light on the front of the drive will activate to indicate that the
drive is in use.
To remove a disc:
1. With the computer turned on, press the eject button. When the tray slides
out, manually pull it the rest of the way out and carefully remove the disk.
2. Close the tray by gently pushing the tray closed.
Note: If the tray does not slide out when you press the eject button, insert the
end of an opened paper clip into the emergency-eject hole located the
front of the CD-ROM or DVD-ROM drive.
22
User Guide