IBM 2-Gigabit Fibre Channel PCI, Installation And Using Manual

Page: 12 / 52

2-Gigabit Fibre Channel PCI Adapter (Type 4-W)
v
2-Gigabit per second Fibre Channel Interface
v
PCI Bus Compatible (64-bit slot)
v
Supports Short Wave Optics (non-OFC)
v
Upgradable microcode (See your System User’s Guide or contact your service
representative)
1. Jumper JX1, Pins 1 to 2 only
2. Data Link Status LEDs
3. Multimode Fiber LC Connector
Software Requirements
The Gigabit Fibre Channel PCI Adapter (Type 4-S) and the 2-Gigabit Fibre Channel PCI
Adapter (Type 4-W) are supported on AIX Version 4.3.3 and later.
Environmental Requirements
v
Operating temperature: 5 degrees C to 40 degrees C
v
Operating humidity: 0 to 90% (non-condensing)
v
Barometric operating pressure: 86 to 106 kPascals
v
Maximum tolerance in power supply variation: +5% to -5%
2
Installation and Using Guide