IBM 10G Network Active Bypass, User Manual

Page: 39 / 56

NTP and Time Zone settings
Use the NTP page to enable the network time protocol (NTP) to synchronize the 10G Network Active
Bypass unit time with a network time server.
The following settings are used for synchronizing the 10G Network Active Bypass unit time with a
network time server:
Table 13. NTP settings
Field Description Default
NTP activation Protocol that synchronizes the 10G
Network Active Bypass unit time
with a network time server Disabled
NTP server Public domain of a collection of
computers that provide time using
NTP us.pool.ntp.org
Use the Time Zone page to set the time zone for the 10G Network Active Bypass unit.
The following settings are used for setting the time zone for the 10G Network Active Bypass unit:
Table 14. Time zone settings
Field Description Default
Current Time Zone Time zone used by the 10G Network
Active Bypass unit America\New York
Change Time Zone Changes the current time zone
setting
Chapter 2. Setting up the 10G Network Active Bypass unit
21