ibidi Gas Incubation System – Silver Line
1.5
Disclaimer
• ibidi shall not be held liable, either directly or indirectly, for any damage incurred as a result of
product use.
• The contents of this manual are subject to change without notice for product improvement.
• This manual is considered complete and accurate at publication.
• This manual does not guarantee the validity of any patent rights or other rights.
• If an ibidi software program doesn’t function properly, this may be caused by a conflict from
another program operating on the computer. In this case, take corrective action by uninstalling
the conflicting product(s).
• ibidi is a registered trademark of ibidi GmbH in Germany and other countries.
1.6
Safety Considerations
WARNING
• Only operate the ibidi Gas Incubation System – Silver Line with the supplied components.
• Only use the cables and plugs delivered with the system. The power plug of the control unit
must be inserted in an outlet with a ground (earth) contact.
• Do not replace detachable power cables by power cables with inadequate specifications. By
violating these instructions, you risk electric shock and fire.
• Only use extension cables that have a protective ground wire.
• Do not operate the ibidi Gas Incubation System – Silver Line under conditions that pose a risk
of explosion, implosion, or the release of gases.
• Only operate the ibidi Gas Incubation System – Silver Line with ultra-pure water.
• Do not place flammable solids, liquids, gases, or gas outlets near the system (e.g., matches,
ethanol, propane gas, solvents). Do not bring these products in contact with any other compo-
nent of the system either.
• Do not operate a damaged ibidi Gas Incubation System – Silver Line. If the housing seems
damaged or something is rattling inside the controller, contact the
for
repair.
• Some accessible parts of the ibidi Gas Incubation System – Silver Line (Humidifying Col-
umn base, water inside the column, and Heated Tubing Package) can reach temperatures up
to 55°C/131°F (60°C/140°F the water inside the column). Avoid touching the temperature-
controlled parts of the system when hot.
• The use of medical gases must take place in rooms with appropriate air exchange in order to
avoid harmful gas concentrations.
Version 1.0 (June 1, 2022)
10
Instruction Manual
