ibidi Heating System, Multi-Well Plates, K-Frame
1.8
Limited Warranty
Products manufactured by ibidi, unless otherwise specified, are warrantied for a period of one year
from the date of shipment to be free of defects in materials and workmanship. If any defects in the
product are found during this warranty period, ibidi will repair or replace the defective part(s) or
product free of charge.
This warranty does not apply to defects resulting from the following:
1. Improper or inadequate installation.
2. Improper or inadequate operation, maintenance, adjustment, or calibration.
3. Unauthorized modification or misuse.
4. Use of unauthorized tubing or fluidic connectors.
5. Use of consumables, disposables, and parts not supplied by an authorized ibidi distributor.
6. Corrosion due to the use of improper solvents, samples, or due to surrounding gases.
7. Accidents beyond ibidi’s control, including natural disasters.
This warranty does not cover consumables, such as cell culture chambers and dishes, tubes, fluidic
connectors, reagents etc.
The warranty for all parts supplied and repairs provided under this warranty expires on the warranty
expiration date of the original product.
1.9
Transporting the ibidi Heating System, Multi-Well Plates, K-Frame
The weight of the Temperature Controller is approx. 1.7 kg/3.8 lbs. Moving the Temperature Con-
troller during operation can pose a risk of personal injury or damage to the instrument.
For transport, switch off the Temperature Controller and then disconnect the heated components
from the controller. Carry the devices carefully and avoid mechanical shocks.
WARNING!
Hot surface (max. 55°C)! Do not touch Heated Lid and Heated Plate when hot. Always disconnect
the instrument from the power supply before transport and leave the instrument to cool down
for approx. 5 minutes.
Version 2.0 (March 22, 2019)
10
Instruction Manual
