INSTALLATION GUIDE
TS53, TM67, and TL75 Drum Mower Lift Kit
● Safely lift or place the mower in a position where you can access the bottom skid
plate and prepare for removal and installation.
● Inspect the factory skid plate for any excess damage that may impede safe
installation and operation.
● Remove the 6x 12mm bolts located on the bottom of each skid plate. The skid
plate is heavy, so be careful and have preventative measures in place for the
supporting of the skid plate as it is being removed and separated from the drum
unit.
● Once the factory skid plate has been removed, place the new longer bolts in
through the bottom of the new skid plate (Fig.1) and use tape to hold them in
place (Fig.2). This will make the installation hassle free in the next steps. Then
place the skid plate on the ground with the bolt threads facing up.
(Fig.1)
(Fig.2)
2021-1.0
IBEX EQUIPMENT CO
