Ibex TS51C Drum Mower Assembly Guide
Copyright 2020 Ibex Equipment Co.
Page | 4
Scope and Purpose
This guide is limited to Ibex TS51C drum mowers (also labeled as Galfre FR/G 130). The guide covers models
manufactured in 2020 and forward.
This manual is a guide to aid in the assembly and start-up basics only. Consult the operations manual for
instructions on usage and safety.
Uncrating
Heavier components can be lifted out of the crate, using lift straps or chains, if a lift is available.
Figure 1 lifting the drum assembly
If no lift is available, the crate will need to be cut open for easier access. Remove the smaller parts, then slide
the drum unit out of the crate onto the ground. The drum mower bottom skids drag across the ground during
use, so it is alright to drag them to the location that you plan to use for assembly.
Lay out the parts so you can see everything in one place.
Figure 2 parts ready to assemble.
