31
TRT33A DV-Win Software
6
DV-Win Software
DV-Win is a Windows program for working with Transformer Turns ratio Tester TRT33A. It enables the
two-way communication TRT33A to a PC over the USB.
DV-Win supports the following functions:
Controlling and starting TRT33A when the tests are performed from the PC; the results could be
stored to PC;
Transfer of test parameters from internal TRT33A memory to the PC.
Note:
Using DV-Win software, the device TRT33A can be operated only from the DV-Win. All buttons on
the front panel of TRT33A device are locked, except the
STOP
button.
Data transferred from TRT33A can be:
- Downloaded in the grid in the form of table,
- Saved as PDF, XLS, DOC and RTF file.
Every Test Reading parameter contains:
- The date and the time of the test,
- The transformer connection (if selected),
- The tap changer positions,
- The test voltage,
- The measured turns ratio values,
- The turns ratio deviations,
- The measured excitation current values,
- The measured phase angle values,
- The vector group of transformer under test,
- The memory location.
6.1
The minimum system requirements
Processor:
Intel® Pentium® 4 Processor Pentium IV 1GHz or better
Memory:
1 GB or more
Operating system:
Windows XP, Windows Vista or Windows 7
Microsoft .NET Framework 4.0
6.2
DV-Win installation
To install the DV-Win software do the following:
- Insert the DV-Win installation CD into the CD-ROM drive,
-
Click on ”Start”,
-
Click on ”Run”,
-
Click on ”Browse”,
- Select the CD-ROM drive,
-
Highlight the ”Setup.exe”,
-
Click on ”Open”,
-
Click on ”OK”,
- Follow the instructions displayed on the screen,
- When the installation process has been completed,
- Exit the program.
