P-1606 Pump and Block Assembly
IBC Technologies Inc.
1-844-432-8422
|
www.ibcboiler.com
120-519E0
-
October 11, 2023
- Released Document
1 of 6
Replacement Instructions - CX
Warning
This replacement kit shall be installed by a qualified service agent in accordance with these
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly a fire, an explosion or production of
carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation
is not proper and complete until the operation is checked as specified in these instructions.
On Demand DHW Heat Exchanger Block with Pump - CX
Part #
Description
Quantity
170-125
Plated HX Block with Pump
1
200-193
Harness, CX CBI
1
150-420
Screw,T Forming,T20, Zn, M5 x 12
3
255-165
CX Combi Foam Seal
1
255-158
O-Ring w/ Brass, G0.75
1
150-411
O-Ring,BunaN, 2.62 x 17.86
1
150-417
D18 clip
1
150-427
½" to ¾" BSPP to NPT Adapter
2
150-428
¾" to 1" BSPP to NPT Adapter
2
When to Install the P-1606 Pump and Block Replacement Kit
Install the P-1606 kit if you need to replace a damaged DHW heat exchanger block and pump.