Version: 23.01
As of: 01/2023
Page
30
from
119
5.3.11 Alu-Mammut SV+ roof hooks
Suitable for vertical installation of the support profile in the 1st layer, e.g. insertion system.
Parameters
Value
Material
Alumnium EN AC-42100-K-T6 (DIN EN 1706)
yield strength
Hook: fy,k = 210 N/mm²
Dimensions base plate (length / width / height)
181/ 71/ (12) mm
Dimensions hook (width / height)
40/ 6 - 8 mm and 35/ 6
–
8 mm
Drilling holes baseplate
2 x ∅ 9 mm, 3 x Ø9 x 14 mm, 2 x Ø9 x 19 mm
Drilling holes hook
Slot
∅
8,5 mm, L=26,5 mm
Hook distance from the base plate
46 mm
weight
0,455 kg
General construction approval
Z-14.4.-515
Maximum ch. load / roof hook [kN]
pressur F
R,k,-x
= 2,85 suction F
R,k,+x
= 1,90
shear F
R,k,y
= 2,20
Accessories
flat head screw 6x100-A2 TX30
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M8
Figure 33 Parameters roof hook Alu-Mammut SV+
Figure 32 Alu-Mammut
SV+ roof hook
Summary of Contents for TopFix 200
