IBC SOLAR TopFix 200, Installation Manual, Page: 27 / 119

Version: 23.01 As of: 01/2023 Page 27 from 119
5.3.8 Plain tile S+ roof hook
Plain tiles have a different shape from normal roofing tiles.
For this reason, a different roof hook type is used.
Parameters Value
Material Stainless steel 1.4307 S275 + S460
yield strength
Stirrup: fy,k = 460 N/mm²
Ground plate: 275 N/mm²
Dimensions base plate (length / width / height)
135/ 70/ 4 mm
Dimensions hook (width / height)
30/ 6 mm
Drilling holes baseplate
10 x ∅ 9 mm
Drilling holes hook
Slot ∅ 11 mm, L=30 mm
Hook distance from the base plate
45 mm
weight
0,97 kg
General construction approval
Z-14.4.-661
Maximum ch. load / roof hook [kN]
Calculation via PV Manager
Accessories
flat head screw 6x100-A2 TX30
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M10
Figure 27 parameters roof hook Biber S+
Figure 25 Biber S+
plain tile roof hook
Figure 26 Depression for Biber S