Version: 23.01
As of: 01/2023
Page
23
from
119
5.3.4 Mammut XL S+ roof hooks
Mammut XL S+" roof hooks are used to ensure the safety of the structure under very high snow loads. This
roof hook provides improved static characteristics compared with the "Mammut S+" roof hook. In certain
conditions (e.g. low snow load zone), it may be possible to install "Mammut XL S+" roof hooks only on every
second rafter and consequently reduce the number of roof hooks. The load-bearing capacity of the
substructure must be given special consideration.
Parameters
Value
Material
Stainless steel 1.4307 S275 + S355
yield strength
Stirrup: fy,k = 350 N/mm²
Ground plate: 275 N/mm²
Dimensions base plate (length / width / height)
135/ 70/ 5 mm
Dimensions hook (width / height)
35/ 8 mm
Drilling holes baseplate
10 x ∅ 9 mm
Drilling holes hook
Slot
∅ 11 mm, L=30 mm
Hook distance from the base plate
45 mm
weight
1,18 kg
General construction approval
Z-14.4.-661
Maximum ch. load / roof hook [kN]
Calculation via PV Manager
Accessories
flat head screw 6x100-A2 TX30
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M10
Figure 18 Parameters roof hook Mammut XL S+
Figure 17 Mammut
XL S+ roof hook
Summary of Contents for TopFix 200
