IBASE Technology SI-606-M, User Manual

Page: 21 / 96

Copyright © 2016 IBASE Technology Inc. All Rights Reserved.
13
IBASE Technology Inc.
2.2 Installations
2.2.1 Installing the Memory
The MBD60E board supports Four DDR3 memory modules for a maximum total of
32GB in DDR3 SODIMM memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and perform the
following steps:
1. Hold the DDR3 module so that the key of the DDR3 module aligned with that on the
memory slot.
2. Gently push the DDR3 module in an upright position until the clips of the slot close
to hold the DDR3 module in place when the DDR3 module touches the bottom of
the slot.
3. To remove the DDR3 module, press the clips with both hands.