IBASE Technology IB936, User Manual, Page: 45 / 66

BIOS SETUP
IB936 User’s Manual 41
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
No
Init Display First
PCI Slot ITEM HELP
Reset Configuration Data
Disabled
Menu Level >
Resources Controlled By
Auto (ESCD)
IRQ Resources
DMA Resources
Press Enter
Press Enter
PCI/VGA Palette Snoop
Disabled
**PCI Express relative items**
Maximum Payload Size
128
PNP OS Installed
Enable the PNP OS Install option if it is supported by the operating
system installed. The default value is
No.
Init Display First
The default setting is PCI Card .
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA cards
can work with PCI/VGA. When this field is enabled, a PCI/VGA can
work with an MPEG ISA/VESA VGA card. When this field is disabled, a
PCI/VGA cannot work with an MPEG ISA/VESA card.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 128.