IBASE Technology FWA8406, User Manual

Page: 21 / 75

14 FWA8408 & FWA8406 User Manual
2.1.1 CPU Installation / Replacement
Follow the instructions below to install or replace the CPU if necessary.
1. Take away the wind scooper as marked below. Then remove the CPU
heatsink.
2. Unlock the CPU socket by pressing the lever sideways, then lift up the
lever and the metal lid.
3. Position the CPU above the socket such that the CPU corner aligns with
the gold triangle matching the socket corner with a small triangle.
4. Carefully insert the CPU into the socket and push down the lever to
secure the CPU.
Then you can install the CPU cooler and fan back.
Note: Ensure that the CPU cooler and the CPU top surface are in total contact
to avoid CPU overheating problem that would cause your system to hang
or be unstable.