IBASE Technology BYTEM-123-PC, User Manual, Page: 4 / 81

iv BYTEM-123-PC User Manual
Green IBASE
This product is compliant with the current RoHS restrictions and
prohibits use of the following substances in concentrations exceeding
0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by
weight (100 ppm).
•
Lead (Pb)
•
Mercury (Hg)
•
Cadmium (Cd)
•
Hexavalent chromium (Cr6+)
•
Polybrominated biphenyls (PBB)
•
Polybrominated diphenyl ether (PBDE)
Important Safety Information
Carefully read the precautions before using the device.
Environmental conditions:

Lay the device horizontally on a stable and solid surface during installation in
case the device may fall, causing serious damage.

Leave plenty of space around the device for ventilation.

Use this product in environments with ambient temperatures between -40
˚C and
70
˚C.

DO NOT LEAVE THIS DEVICE IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY BE BELOW -40° C OR ABOVE 85° C. To
prevent from damages, the device must be used in a controlled environment.

Keep the device away from humidity to avoid fog or condensation from
accumulating on the inner surface of the panel.
WARNING
Attention during use:

Do not use this product near water.

Do not spill water or any other liquids on your device.

Operate this device from the type of power indicated on the marking label. If you
are not sure of the type of power available, consult your distributor or local
power company.

If you use an extension cord, make sure that the total ampere rating of the
product plugged into the extension cord does not exceed its limits.
Avoid Disassembly
You are not suggested to disassemble, repair or make any modification to the device.
Disassembly, modification, or any attempt at repair could generate hazards and
cause damage to the device, even bodily injury or property damage, and will void any
warranty.
Attention during use: