IBASE Technology AMS210, User Manual

Page: 17 / 73

Hardware Configuration
AMS210 User Manual 11
2
2.1 Essential Installations
The system cover has two parts
– the left and the right. To remove the right-side
cover, loosen the two screws (M3x6) as shown in the picture below. This is done
prior to the installation the PCI-E expansion card. The left-side cover uses six
screws (M3x6). To remove or install the HDD, there is no need to remove any of
the above-mentioned screws, just the two screws of the HDD compartment
cover.
2.1.1 Battery Installation
The battery compartment is secured by one screw (M3x6). Unscrew the
compartment cover and install the battery as shown below.
Position the battery by observing the polarity. Replace the cover.