iB-WPA300N
300M MIMO Wireless-N PCI-E Adapter
12
Figure 3-4
4) To view more information about the network currently connected, click
Status
in
the tools section and the page will display information such as the network type,
channel, rate, etc.
Figure 3-5
3.2
To connect using WPS
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an
existing network quickly.
If your wireless Router supports WPS (Quick Security Setup), you can establish a wireless
connection between wireless card and Router using either Push Button Configuration (
PBC
)
method or
PIN
method. Three WPS connection methods are listed in the following parts,
while the third method is only supported in Windows XP and Windows Vista.
3.2.1
PBC (Push Button Configuration) method
1. Press
the
WPS
button on the Router.
2. Open Client Utility and click
WPS
tab. Select
Push the button on my access point or
wireless router
and then click
Connect
.
