Manual
ibaBM-DP
72
Issue 1.7
10.3.1.3 "Digital" tab
If digital signals have been configured in the modules and the configuration has been
transferred to ibaBM-DP, you will see here an overview of all acquired digital signals with
an online overview of the currently acquired values.
Fig. 41: "ibaBM-DP" module – "Digital" tab
10.3.1.4 "Diagnostics" tab
Here, the detected masters and slaves and their current state are displayed.
For a description of the diagnostic functions, please see chapter 10.4.
10.3.1.5 "Profibus Browser" tab
The "Profibus Browser" tab belongs to the diagnostic functions and displays detailed
information about both PROFIBUS systems (e. g. bus cycle time) and about the available
input and output ranges of the individual slaves.
For a description of the diagnostic functions, please see chapter 10.4.
10.3.1.6 Bus node X40: Bus0 / X41: Bus1
The device module “ibaBM-DP” shows two bus nodes “X40: Bus0“ and „X41: Bus1“
which represent the two bus connections available on the device (see chapter 7.3.6).
Modules which are configured on “X40: Bus0” or “X41: Bus1” physically refer to the re-
spective bus connection.
If you mark a bus node, all status and diagnostic information as well as the measured
bus voltages for the connected PROFIBUS line are shown.
For a detailed description, please see chapter 10.4.
10.3.2 "Sniffer" module
The "Sniffer" module can be added to an ibaBM-DP device module. You can use it, if you
want to "listen to" signals from an existing Master/Slave communication.
