IBA ibaPQU-S, Manual

Page: 16 / 127

Manual ibaPQU-S
16
Issue 1.5
6.2 Connecting
1. Connect the measuring lines connected to the measuring objects to the I/O module
inputs. Connection principles are described in chapter 8.
2. Use an ibaNet FO patch cable (duplex) to connect the device to the ibaPDA com-
puter:

the RX input (X11) of the device with the TX interface of the ibaFOB-D card in the
ibaPDA computer,

the TX output (X10) of the device with the RX interface of the ibaFOB-D card in
the ibaPDA computer.
3. Once all required cables have been connected, reconnect the central unit to the
power supply.
4. Switch on the voltage supply of the central unit.
6.3 Dismounting
1. Switch off the device.
2. Remove all cables.
3. Hold tight the device and remove the upper and lower fixing screw.
4. Pull the device or the I/O modules off the backplane.