ibaMS16xDO-2A
Manual
Issue 1.3
9
4
Safety instructions
4.1
Proper use
This device is used for the output of digital signals. It is only allowed to use the device in
combination with a central unit (e.g. ibaPADU-S-IT-2x16 or ibaPADU-S-CM).
The device is only to be used as shown in the „Technical Data“.
4.2
Special safety instructions
Do not connect the device to branch circuits! The device is not made for this type of
operation.
Do only operate the output channels with SELV (Safety Extra Low Voltage)!
Electric shock!
The device is only designed for electrical measuring voltages as shown in the „Technical
Data“!
Do not use any damaged measuring cables!
You must not attach or detach measuring cables to the device that is under voltage!
Modules must NOT be attached or detached to/from the rack under voltage!
Switch off the central unit or disconnect power supply before attaching/detaching the
modules.
Important note
Do not open the device! When opening the device, you will lose the warranty!
Note
Please only clean the device on the outside with a dry or a lightly wet and statically
discharged cloth.
