ibaClock
Manual
Issue 1.4
27
9.3.3
Network
This page is only
accessible after the login over the user “admin”.
Figure 6: Web interface network settings
This page shows
both network adapters the device has. The upper interface „Network
interface: Ethernet“ describes the settings of the LAN interface X22, the lower interface
„TCP/IP over USB“ describes the settings of the USB connection X12.
(1)
Here you can select whether a DHCP server, that is available in the network,
or
(2)
a fixed IP address should be used.
(3)
“Subnet Mask” suitable for the network
(4)
“Default Gateway”, if no gateway is used enter 0.0.0.0 here.
(5)
By pressing the <Submit> button the entri
es for the network interface “Ether-
net” are saved in the device.
(6)
By pressing the <Refresh> button the display of the entries is updated (e.g.
useful for DHCP).
(7)
Fixed set and non-changeable IP address of the USB connection
