Manual
ibaDeskline SAS
22
Issue 1.4
7.4
Installing ibaOut-Temp/ibaOut-State
The temperature and the status of the power supply unit can be monitored with the slot
cards ibaOut-Temp and ibaOut-State, see also chapter 5.5.
The installation procedure is identical for both cards. The installation is described below
using the example of ibaOut-Temp in an ibaRackline system.
ibaOut-Temp
Order no. 11.110001
ibaOut-State
Order no. 11.110002
After having opened the housing cover proceed as follows:
4.
ibaOut-Temp can be installed in one of the slots X20 to X26 (X20 is recommended).
5.
Break out the cover plate of the intended slot on the back of the device using a screw-
driver.
6.
Above the slot, there is a screw in an opening, which is used to fix the card later.
Loosen the screw and remove it.