ibaLink-VME
Manual
Issue 1.8
19
7.2.5
ibaNet 32Mbit P2P (mode 4)
The “fast” peer-to-peer mode is also used to connect two cards, but more signals can be
transmitted at a higher data rate.
Channel 2: the data of channel 1 is mirrored to channel 2 and can be used for diagnostics
(e.g. data recording with ibaPDA)
The S2 Range switch specifies the transmission mode:
S2 Range
switch
Transmission mode
0
64 I 64 Digital in 50 μsec
1
128 I 128 Digital in 100 μsec
2
256 I 256 Digital in 200 μsec
3
512 I 512 Digital in 400 μsec
4
1024 I 1024 Digital in 800
μsec
5
Reserved
6
32 Real + 32 Digital in 50 μsec
7
64 Real + 64 Digital in 100 μsec
8
128 Real + 128 Digital in 200 μsec
9
256 Real + 256 Digital in 400 μsec
A
512 Real + 512 Digital in 10
00 μsec
B
Reserved
C
2872 bytes in 1 ms
D
4024 bytes in 1.4 ms
E
Reserved
F
Reserved
Note
The DIP switches for setting the telegram format (Real/Integer) are ignored, since the
format is specified by switch S2.
