IAI Msep, Instruction Manual

Page: 27 / 296

Chapter 1 Specifications Check
19
Chapter 1 Specifications Check
1.1 Product Check
1.1.1 Parts
The standard configuration of this product is comprised of the following parts.
If you find any faulty or missing parts, contact your local IAI distributor.
No. Part Name Model Remarks
1 Controller Main Body
Refer to “How to read the model plate”,
“How to read the model”.
Accessories
2 Power Connector
FKC2.5HC/4-ST-5.08
(Supplier : PHOENIX CONTACT)
3
External Brake Input
Connector
FMCD1.5/5-ST-3.5
(Supplier : PHOENIX CONTACT)
4
Drive Cutoff/Emergency
Stop Input Connector
FMCD1.5/8-ST-3.5
(Supplier : PHOENIX CONTACT)
5 System I/O Connector
FMCD1.5/4-ST-3.5
(Supplier : PHOENIX CONTACT)
6
I/O Flat Cable
(For PIO Type)
CB-MSEP-PIO***
***shows the cable length
(Example) *** : 020 = 2 [m]
7
CC-Link Connector
(For CC-Link Type)
MSTB2.5/5-ST-5.08 ABGY AU
(Supplier : PHOENIX CONTACT)
8
DeviceNet Connector
(For DeviceNet Type)
MSTB2.5/5-ST-5.08 ABGY AU
(Supplier : PHOENIX CONTACT)
9
Absolute Battery Box
(Option)
MSEP-ABU (Battery AB-7) For Simple Absolute Type
10 First Step Guide
11 Instruction Manual (DVD)
12 Safety Guide
1.1.2 Teaching Tool
A teaching tool such as PC software is necessary when performing the setup for position
setting, parameter setting, etc. that can only be done on the teaching tool.
Please prepare either of the following teaching tools.
No. Part Name Model
1
PC Software
(Includes RS232C Exchange A Peripheral Communication
Cable)
RCM-101-MW
2
PC Software
(Includes USB Exchange A USB Cable + Peripheral
Communication Cable)
RCM-101-USB
3 Teaching Pendant (Touch Panel Teaching) CON-PTA
4
Teaching Pendant
(Touch Panel Teaching with deadman switch)
CON-PDA
5
Teaching Pendant
(Touch Panel Teaching with deadman TP Adapter
(RCB-LB-TG))
CON-PGA