IAI AP-3200T-PMCL User Manual Download

Page: 21 / 76

—

AP-3200T-

PMCL

Configure the gain.

Expand [AnalogControl], and select the gain you want to configure in [GainSelector].

[AnalogAll] (master gain), [AnalogRed] (R gain), [AnalogBlue] (B gain), [DigitalRed]

(digital R gain), and [DigitalBlue] (digital B gain) can be configured.

Configure the gain value in [Gain].

• [AnalogAll] (master gain) can be set to a value from x1 to x8 (0 dB to about +18 dB) the

analog gain value. The resolution is set in x0.1 steps. Values are configured by multipliers.

• The [AnalogRed] (R gain) and [AnalogBlue] (B gain) can be set to a value from

x0.47 to x4.0 (–6.5 dB to +12 dB) the [AnalogAll] (master gain) value.

• The [DigitalRed] (digital R gain) and [DigitalBlue] (digital B gain) can be set to a value

from x0.9 to x1.1 (–0.915 dB to +0.828 dB) the [AnalogAll] (master gain) value.

Note

The following two methods are available for adjusting the gain manually.

• MasterMode (set IndividualGainMode to Off) (see the above)

• IndividualMode (set IndividualGainMode to On)

For details, see "Gain Control" .

Adjusting the White Balance

Adjust the white balance using the automatic adjustment function.

■

Automatic white balance adjustment

Place a white sheet of paper or similar object under the same lighting

conditions as the intended subject, and zoom in to capture the white.

White objects near the subject, such as a white cloth or wall, can also be used.
Be sure to prevent the high-intensity spot lights from entering the screen.

Select the [BalanceWhiteAuto] tab, and select [Continuous], [Once],

[ExposureContinuous], or [ExposureOnce] for the adjustment method.

The white balance is automatically adjusted.

Note

• The white balance is adjusted via gain adjustment for [Continuous] and [Once].

• The white balance is adjusted via exposure time adjustment for [ExposureContinuous] and

[ExposureOnce].

Adjusting the Black Level

Expand [AnalogControl], and select the black level you want to configure in

[BlackLevelSelector].

[DigitalAll] (master black), [DigitalRed] (digital R), and [DigitalBlue] (digital B) can be

configured.

Specify the adjustment value in [BlackLevel].

Summary of Contents for AP-3200T-PMCL













































































Search results

Summary of Contents for AP-3200T-PMCL

Reviews:

Related manuals for AP-3200T-PMCL

Brands by name

Popular brands

IAI AP-3200T-PMCL, User Manual

Search results

Summary of Contents for AP-3200T-PMCL

Reviews:

Related manuals for AP-3200T-PMCL

Brands by name

Popular brands