IAG IAG-ENG-5008BK Page 1 Instructions Download

Page: 1 / 2

IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com

IAG Battery Tie Down

Part# IAG-ENG-5008BK / BL / RD / SL

Tools Required: 10mm wrench / 10mm Deep Socket (1/4”

drive preferred) / ratchet / torque wrench

Thank you for choosing IAG Performance. The battery tie

down is designed to secure the OE Subaru battery in your

engine bay. CAD modeled and CNC machined this piece is

designed to brighten your engine bay and pay homage to

the boxer engine. Supplied with your tie down are new j-

hooks and acorn nuts. You are not required to use the

supplied hardware but we feel it provides a more polished

appearance. We have tested this on several aftermarket

batteries with success, however if you have a different size

aftermarket battery you may be required to reuse your j-

hooks.

Please follow the instructions below for an easy

installation.

Removal

1. Using your 10mm wrench, disconnect the negative

battery terminal.

2. Using your 10mm socket and ratchet, remove the nuts

holding the existing tie down on top of the battery.

3. Remove the factory tie down and set aside.

Take note of where the bottoms of the j-hooks are

secured. Gently push down on the old j-hooks to dislodge

them from the engine bay. Set them aside with you old

hardware.

Summary of Contents for IAG-ENG-5008BK

Page 1: ...ts You are not required to use the supplied hardware but we feel it provides a more polished appearance We have tested this on several aftermarket batteries with success however if you have a differen...

Page 2: ...t this point Set the tie down aside 4 5 Now take your other j hook and slide into the hole on the chassis that is located on the back side of the battery Hold the j hook upright and side the tie down...