i3DVR International annexxus 300 series, User Manual, Page: 84 / 109

Share

Page: 84 / 109

i3DVR International annexxus 300 series User Manual Download Page 84

3.4.3. Playback Control Panel

To play back the video recording file saved on the internal storage device, perform video search as outlined in Searching
Backup Video Recordings section.

To start video playback, double-click the desired video clip OR select the desired video clip from the list and click the Play

button in the Control Panel. The video playback will start immediately. To control the video playback, use Playback

Control Panel.

Playback Panel includes:

Control Buttons

,

Seek Slider

,

Status Bar

.

Control buttons allow to pause/resume playback, display video frame-by-frame or increase the playback speed.

Drag the seek slider to immediately move to the desired location in the video file.

Status bar displays the following statistics: Frame #, Total number of frames, playback time elapsed, total playback dur-
ation time, backup video file name.

Control Buttons

Toggle between Play and Pause mode. Click Pause/Play to pause/resume the playback.

/

Stop playback and show the next frame

80

Playback Control Panel

Chapter 3. Remote Connection via Internet Explorer (Web
Browser)

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

«
...
82
83
84
85
86
...
»

Summary of Contents for annexxus 300 series














































































































Reviews:

No comments