2.10. User Management Setup
Each Annexxus device allows configuring one administrative account and up to 15 additional operator accounts.
Administrator user
Default administrator user name is
admin
, default password is set to
1234
. Administrator user is the only user that
may change administrative password. Administrator user name and user privileges cannot be changed. In case adminis-
trative password has been misplaced after being changed, use Annexxus Finder to reset the administrative password to
the factory default.
Administrator user is the only user that can add, modify or delete additional operator users.
Operator user
Operator users will only have access to setup tabs and features that are specified in their user privileges. Operator user
may not add, modify or delete other operator accounts. Operator user can only change his/her own password.
2.10.1. Changing Administrative Password
To change administrative password, you must be logged in as Administrator.
1. In the User Management setup tab, right-click on the Administrator account in the left-hand pane and select
Modify
from the context menu
2. Type in the new password in
Password
and
Re-enter Password
fields. Password may only consist of numbers
and may not exceed 16 characters.
3. Click
Save
to save the new administrative password
57
User Management Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at