Note
Annexxus 301, 301C, 301C2M, 301D2M
support 1 control output. Annexxus 304
supports 2 control outputs.
4. Click
Confirm
to save the settings and to close Sensor Input window.
2.9.1.3. Associate Sensor Input with Video Channel(s)
Each Annexxus sensor input can be associated with one or more Annexxus video channel(s), provided these video channels
are properly connected and configured in Channels setup tab.
In addition to being able to generate alarm logs based on sensor activity, it is also possible to associate sensor activity
with video recording.
To associate Sensor Input with one or more video channels, do the following:
1. Click
Associate With...
. Sensor Input window will be displayed.
2. Check off the desired video channels in
Check Mark to Activate Recording
area. When sensor input is triggered,
the video recording will be initiated for the selected video channel(s).
Important:
Video channels must be properly connected to the Annexxus module and must be also configured in the
Channels setup tab, where Alarm Recording Schedule can be assigned to each video channel.
53
Sensor Input(s) Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at