background image

SAFETY

When installing your Ax85 camera be sure to avoid:

• 

excessive heat, such as direct sunlight or heating appliances

• 

contaminants such as dust and smoke

• 

strong magnetic fields

• 

moisture and humidity

• 

areas with mechanical vibrations

• 

fluorescent lamps or objects that reflect light and unstable light sources 

• 

temperatures below -40° C (-40° F) and above 50° C (122° F).

To avoid electrical shock and to preserve the product warranty, 

DO NOT

 disassemble the 

camera. Refer servicing to qualified personnel only.

POWER SUPPLY

Ensure the supplied voltage meets the power consumption requirements of this camera 

before powering the camera on. Incorrect voltage may cause irreparable damage to the 

video camera and will effectively void the camera warranty. 

Ax85 requires AC24V or PoE+ power.

CLEANING

• 

For maximum optical clarity, the camera dome or lens must remain clean. Use a soft, 

dry cloth to remove finger prints or dust from the dome cover.

• 

 Use a blower to remove dust from the lens.

• 

Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a 

small quantity of neutral detergent, then wipe dry.

• 

 Do not use volatile solvents such as alcohol, benzene, or thinners, as they may 

damage the surface finishes.

PACKAGE CONTENTS

Ensure that the items received match those listed on the order form and the packing slip. 

In addition to this manual and a fully assembled camera, the dome camera packing box 

includes:

A. 

Standard RJ45 Connector x2 

B. 

Dessicant x1. Use in all outdoor installations. 

Attach to the underside of the camera’s inner 

liner/shroud.

C. 

Round Head Screw (Tapping Type) w/ O-ring x4 

D. 

Plastic Anchor x4 

E. 

Surface Mount template x1

F. 

Flush Mount template x1

G. 

Security torx bit x1

H. 

Long Machine type screws x3 

(for Flush Mounting with back box installations)

CAMERA PARTS AND DEFINITIONS

Quick Start Guide

8MP Infrared Outdoor IP Dome Camera w/ Motorized Lens

Ax85

i3-TRNG-CAMS-

Ax85.

indd

Rev

190911

1. 

Back box. Camera’s back box comes with six (6) 90% pre-drilled hole dimples. 

For surface mounting, complete drilling a minimum of two (2) holes.

2. 

Camera module / second housing.

3. 

Tilt bracket with locking screw

4. 

Inner liner / Shroud. Inner liner is attached to the camera module but can be 

partially detached for easier lens adjustment. Attach the desiccant to the inside of 

the Inner Liner, without obstructing the lens movement.

5. 

IR board

6. 

Screws securing the dome bubble housing to camera module (x3, silver)

7. 

Dome bubble housing / Dome cover

8. 

Lexan bubble

9. 

3/4” waterproof rubber plug. For best waterproof performance, use a network cable 

5mm or more in diameter. To maintain IP67 waterproof rating, use sealant on the 

threads during installation. If using the side conduit hole, replace the rubber plug 

with the metal plug from the side conduit. Rubber plug is not recommended for use 

in the side conduit hole.

10. 

3/4” side conduit hole with metal plug. If using the side conduit hole, remove the 

metal plug and use it instead of the rubber plug in the top conduit hole. To maintain 

IP67 waterproof rating, use sealant on the threads during installation.

11. 

Six (6) 90% pre-drilled hole dimples.

12. 

Reset pin-hole button. Press for 1 second to reboot the camera. 

13. 

Default pin-hole button. Press for 6 seconds to restore camera settings to factory 

defaults.

14. 

Service Video Output RCA Port. Connect an analog service monitor for a live image 

output preview.

15. 

Screws attaching camera module to the back box (x3, silver)

16. 

Screws to engage locking arms (x2, black)

17. 

Micro SD Card slot for on-camera video storage. (microSD card sold separately)

Lens Direction

GUIDE PATTERN

Scan this QR code or visit 

www.i3international.com

 to 

view and download the full User Manual for this camera. Also 

available for download is the 

AnnexxusConfigurationTool 

or ACT program used to locate and configure your cameras 

with your SRX-Pro software. This program is already installed 

in SRX-Pro v3.3.3.69 and higher. Please contact our Technical 

Support team if you have any questions or concerns regarding 

camera installation or you require software services or 

support. Technical support can be reached by email at: 

[email protected] 

or by phone toll free 

1.877.877.7241.

QR Code to Complete 

User Manual / ACT

1

2

5

3

4

6

7

8

F

G

GUIDE PATTERN

Cut Line
Camera Outline

A

C

D

H

E

B

10 11

9

9

63 mm (2.5”)

63 mm (2.5”)

84 mm (3.3”)

147 mm (5¾”)

68 mm (2.67”)

94 mm (3.7”)

158 mm (6¼”)

DEFAULT

RESET

MONITOR

RESET

MONITOR

DEFAULT

12

13

14

15

15

15

16

16

17

Reviews: