Installation of the thermostat
First of all disassemble the thermostat. Take off the front
cover, using a thin screwdriver, carefully press in the locks
located on the upper and lower sides of the front cover,
pulling it out slightly (fig. 10). Remove the cover (fig.11).
Remove the frame (fig.12).
Place the device into the junction box and fasten
by means of at least two screws (preferably located
at the same horizontal level) (fig.13).
Assemble the thermostat in reverse order. Install
the frame carefully ensuring that it closely fits to the device’s
case. Then return the front cover to its place and press it
ensuring that both locks are fixed. Make sure that the front
cover is properly affixed.
21
