I-Tech MIO-IONOTENS User Manual Download

Page: 16 / 48

IACER Srl

MNPG151-08

Device use

MIO-IONOTENS is a portable and battery-powered device that generates TENS

and ionophoresis currents. It is particularly indicated for daily treatments of

the most commons muscle diseases.

MIO-IONOTENS has 14 preadjusted TENS programs, 10 preadjusted programs

REHA (including 3 programs iontophoresis) and 12 free memories adjustable

by the user to create programs according to his needs. The program MEM 13

is a battery test.

Operating instructions

It is recommended reading the entire user manual before using.
To start the therapy, turn MIO-IONOTENS on using the

button.

PREADJUSTED PROGRAMS

Read the follow instructions to use the preadjusted programs and start the

therapy:

Select the program group using the

MODE/ESC

button (TENS, REHA,

MEM).

Select the program using

PRG+

and

PRG-

buttons (refer to the follow

sections to get all technical specifications).

Increase current intensity for the channels using CH1 and CH2 (

▲

)

buttons. The value can be adjusted with stepping 1mA. Press CH1 and

CH2 (

▼

) buttons to decrease the intensity.MIO-IONOTENS recognize

the electrodes connection: in case of faulty connection, when the

intensity reaches 15mA the value is resetted to zero.

The remaining time is showed on the display of MIO-IONOTENS. An

acoustic signal advises the user when the treatment is completed.

Turn off the device keeping pressed the

button for at least two

seconds.

FREE MEMORIES (ADJUSTABLE PROGRAMS)

With MIO-IONOTENS you can set the parameters according to your needs or

indicated by the doctor/physical therapist using the MEM programs.

Read the following instructions to adjust the parameters:

Select

MEM

by pressing

MODE/ESC

button. Scroll the programs using

PRG+

and

PRG-

buttons to display the preadjusted technical

specifications. Read the following instructions to adjust the chosen

program parameters: time, frequency and width impulse.

Summary of Contents for MIO-IONOTENS

















































Search results

Summary of Contents for MIO-IONOTENS

Reviews:

Related manuals for MIO-IONOTENS

Brands by name

Popular brands

I-Tech MIO-IONOTENS, User Manual

Search results

Summary of Contents for MIO-IONOTENS

Reviews:

Related manuals for MIO-IONOTENS

Brands by name

Popular brands