34
6.8.2
Cleaning the recovery tank, float and filter bag
Clean the recovery tank after each cleaning
task or on a daily basis.
1.
Gently open the lid of the recovery tank
compartment (Figure 30, pos. 3) on top of
the co-botic
™
45.
2.
Flip the recovery tank handle
(Figure 30, pos. 1) to a vertical position
and remove the recovery tank.
Figure 30
3.
Remove the lid of the recovery tank
(Figure 31, pos. 1).
4.
Dispose of dirty water from the recovery
tank in an appropriate drain.
To clean the recovery tank thoroughly:
5.
Partially fill the tank with fresh water and
hold it in an upright position.
6.
Swirl the tank repeatedly, thoroughly
rinsing all the dirt and debris out from the
tank.
7.
Rinse the tank with clean water.
8.
Clean the float (Figure 31, pos. 2) and
check that it moves freely.
Figure 31
