[Host check]
From the pull-down menu of “Host check”, the registered host can be selected and the selected host’s IP
address can be checked.
The registered IP address will be displayed with the access level.
(Example: 192.168.0.21 [1])
To delete the registered host, click the [Delete] button after selecting the IP address to be deleted.
3.9.3 Configure IEEE 802.1X [IEEE 802.1X]
Click the [IEEE 802.1X] tab on the “User mng.” page. (
®
For menu display and how to operate, refer to
“3.2.1 How to display the setup menu”, “3.2.2 How to operate the setup menu”)
The settings relating to IEEE 802.1X can be configured on this page.
[IEEE 802.1X]
Select “On” or “Off” to determine whether or not to perform port authentication using IEEE 802.1X.
•
Default:
Off
[User name]
Enter the user name to access the authentication LAN switch.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & : ; \
[Password]
[Retype password]
Enter the password to access the authentication LAN switch.
124
Operating Instructions
3 Detailed Settings
