1 Operations
1.1 Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
1.1.1 Monitor images from a single camera
1.
Start up the web browser.
2.
Enter the IP address designated using the “IP Setting Software” in the address box of the browser.
•
Example when entering an IPv4 address:
http://URL registered using IPv4 address
http://192.168.0.10/
•
Example when entering an IPv6 address:
http://[URL registered using IPv6 address]
http://[2001:db8::10]/
<Example of IPv4 access>
IMPORTANT
•
When the HTTP port number is changed from “80”, enter “http://IP address of the : (colon)
+ port number” in the address box of the browser. (Example: http://192.168.0.11:8080)
•
When this camera is in a local network, configure the proxy server setting ([Settings]
®
[Network
and Internet]
®
[Proxy]) not to use the proxy server for the local address.
Note
•
Refer to <Control No.: P0002> and <Control No.: P0003> in the support video page of the support
site below for more information if [HTTPS] is selected for [HTTPS] - [Connection] on the
[Advanced] tab of the network page (
®
“3.10.1 Configure the network settings [Network]”).
https://i-pro.com/global/en/surveillance/training-support/support/technical-information#Network
3.
Press the [Enter] key on the keyboard.
→
The window with the user name and password entry fields will be displayed.
10
Operating Instructions
1 Operations
