Operating Instructions
Included Installation Instructions
RJ45 Ethernet Cable
For professional use only.
Model No.
WV-QCA500A
(1 pc.)
WV-QCA500APK
(10 pcs.)
Before attempting to connect or install this product, please read these instructions carefully
and save this manual for future use.
The external appearance and other parts shown in this manual may differ from the actual
product within the scope that will not interfere with normal use due to improvement of the
product.
Also read the Operating Instructions for the camera you are using.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting
from failures arising out of improper installation or operation inconsistent with this
documentation.
Fs0421-1042
Printed in China
Preface
This product is an Ethernet extension cable with a waterproofing grommet. By using an RJ45
waterproof jack to convert the RJ45 network connector on an outdoor camera, it is possible to
easily replace a past model that uses a waterproof connector.
For the latest information about the supported cameras, refer to our support website
(https://i-pro.com/global/en/surveillance/training_support/support/technical_information
<Control No.:C0501>).
Specifications
Power source*
1
:
PoE (IEEE802.3af compliant)
Ambient operating temperature: –40 °C to +60 °C {–40 °F to +140 °F}
Ambient operating humidity:
10 % to 100 % (no condensation)
Storage temperature:
–30 °C to +60 °C {–22 °F to +140 °F}
Storage humidity:
10 % to 95 % (no condensation)
Network*
1
:
10BASE-T / 100BASE-TX / RJ45 connector
Mass:
Approx. 35
g
{0.08 lbs}
*1 The specifications of the network camera body apply.
Precaution
Do not attempt to disassemble or modify this product.
Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or
inspections.
Refer installation work to the dealer.
Installation work requires technique and experience. Failure to observe this may cause fire,
electric shock, injury, or damage to the product. Be sure to consult the dealer.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may
cause fire.
Correctly perform all wiring.
Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.
© i-PRO Co., Ltd. 2022
For U.S. and Canada:
i-PRO Americas Inc.
https://www.i-pro.com/
For Europe and other countries:
i-PRO Co., Ltd.
Fukuoka, Japan
https://www.i-pro.com/
i-PRO EMEA B.V. UK Branch
1010 Cambourne Business Park,
Cambridgeshire CB23 6DP
Authorised Representative in EU:
i-PRO EMEA B.V.
Laarderhoogtweg 25, 1101 EB
Amsterdam, Netherlands
WV-QCA500A_PGQX2459YAC6_英.indd 1
2021/10/28 11:29:16
