2.
First pass the coaxial cable through the BNC connector cover (accessory), then
connect the coaxial cable to the BNC connector of the camera side unit.
To receiver side unit
BNC connector
Coaxial cable
BNC connector cover
(Included parts of camera side unit)
IMPORTANT
•
When connecting the coaxial cable to the unit, make sure that no other
devices are connected to the coaxial cable. Connecting the coaxial cable to
the unit when there are other devices connected (such as an analog CCTV
camera), may cause damage to the connected device.
•
When using existing coaxial cables, disconnect other devices that are
connected to the coaxial cable before connecting to the unit.
•
Measure the insulation resistance of the coaxial cable (new or existing) before
making connections.
Insulation resistance value: 1 M
W
or more for DC 500 V
•
Confirm the length of the coaxial cable when using the PoE function (see
page 31, page 33).
36
Operating Instructions
4 Connecting the Unit
