15
3
Connections
Connection of cameras, a mouse and a PC
Connect the camera to the camera port on the rear side of this product.
Connect the included mouse to the mouse connection port on the rear side of the recorder.
Connect PC to the PC port on the rear side of this product via a switching hub.
Connect this product to the camera and switching hub by using an Ethernet cable (locally procured: category 5e or higher,
straight).
IP address: 192.168.0.250
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Camera (×16 max.)
IP address (example): 192.168.0.101~192.168.0.116
Subnet mask: 255.255.255.0
Mouse (included)
Switching hub
Network
Ethernet cable
(locally procured: category 5e or above, straight)
IP address: 192.168.0.x (0, 1, 250, 255,
Except the camera's IP address)
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Recorder
Note:
• The camera port comes with the PoE+ power supply function that complies with IEEE802.3at.
• If the camera is located at a distance (approx. 100 m) greater than the PoE+ power supply capacity, connect it to the PC
port via the PoE+ camera power supply unit (locally procured) or use WJ-PU201*(option).
* WJ-PU201 refer to WJ-PU201P (For U.S.), WJ-PU201/G (For Europe), WJ-PU201F/G (For Europe).
• For information on preventing the Ethernet cable disconnection, refer to [How to prevent the Ethernet cable from
disconnecting] in [Major operating controls and their functions]> [Rear view] in the Important Information.
