79
About the change of the HDD operational mode
About the HDD operational mode
Single mode:
Images and audio from the cameras will be recorded on the HDD of this product.
Mirroring mode:
The same images and audio from the cameras will be recorded on the 2 HDDs of this
product.
When one of the 2 HDDs is replaced with a new one, it is possible to copy data on the
other HDD to the replaced HDD.
Change the operation mode of HDD [Change the operation mode of HDD]
Step 1
Click the [Execute >] button on the "Change the
operation mode of HDD" section.
→
→
The "Change the operation mode of HDD"
window will be displayed.
Step 2
Step 2
Select the desired operation mode of HDD, and then
click the [Start] button.
Important:
• When the operational mode of HDD is changed
(except the case that the operational mode is
changed from the mirroring mode to the single
mode), all data on the HDDs will be erased.
• The capacity of the HDD in the mirroring mode will
become almost half if compared with the single
mode.
• When the operational mode of HDD is changed
from the mirroring mode to the single mode, the
status of the HDD will turn to "Playback-only".
• When "Operation mode of HDD" is changed, the
recorder will be automatically rebooted.
Note:
• Only NU301 can use the mirroring mode.
• When one of the HDDs is replaced in the mirroring
mode, "Add" will be displayed in the status
information section of "HDD information". The
newly replaced HDD will start working in the
mirroring mode when "Add HDD" is executed. In
this case, all data on the replaced HDD will be
erased.
[Setup via recorder's main monitor]
