65
Set up the user level for individual cameras
Select the cameras allowed for operation by each user level (operator/viewer/logged out) by marking the
respective checkboxes.
Remove the check mark from any cameras not to be displayed. The setting for the administrator/manager
cannot be changed.
Register, edit or delete the user information
[User registration]
Use this tab to register, edit or delete user names and passwords.
[Back] button
Click the button after completing the settings. The
screen returns to the [Basic] tab.
■
Register new user
Register user information such as a user name,
password and operation level.
The maximum number of users that can be registered
is 32.
[User name]
Enter the user name using the on-screen keyboard.
The user name must be between 1-32 characters
including the half-width alphanumeric and the symbol
excluding " " ", " & ", " : ", " ; ", "¥" ",".
[Password]
Enter the user password using the on-screen
keyboard. The password must be between 8-32
characters including the half-width alphanumeric and
the symbol (excluding " " " and " & "). Use at least
three types of characters among alphabet
(uppercase), alphabet(lowercase), numbers and
symbols. The registered password will be displayed
as "*****" regardless of what is entered.
Important:
• For enhanced security, change the password on a
regular basis.
• Do not reuse passwords on other recorders or
devices.
• If you forget the administrator name and the
password, the recorder must be initialized (repair).
Note:
• If the AI privacy guard recording camera is set,
clicking the [Execute] button on the screen can
remove all the check marks from the cameras
without AI privacy guard.
[Setup via recorder's main monitor]
