57
When using Dynamic DNS Update
[Host name]
Enter the host name to use with the Dynamic DNS
Update service.
Available number of characters : 0 to 250 characters
Enter in the format (Host name).(Domain name)
Default:
NWDR
Note:
• Contact your network administrator regarding
usable host names.
[Access interval]
From the below, select the interval for checking the IP
address and host name of the Dynamic DNS Update
Service server.
10 min. / 20 min. / 30 min. / 40 min. / 50 min. / 1 h /
6 h / 24 h.
Default:
1 h
Important:
• Port forwarding needs to be set on the router
before using the DDNS service of another
company. Absolutely no warranty is provided for
behavior involving another company's DDNS
service.
• Accordingly, our company bears no responsibility
for any failure or damage caused in the using
environment of this product due to the use of
another company's DDNS service. For information
regarding the selection and setting of DDNS
services of other companies, contact the service
provider.
■
Other setup
[HTTP port number]
Specify the HTTP port number to be used to send
images from the recorder.
It is unnecessary to change it for normal use.
1 - 65535
Default:
80
Note:
• Depending on the network settings, network
communication may not be established if the
HTTP port number has been changed. In this
case, refer to the administrator of each network.
• The following numbers, the HTTPS port number,
the site alarm receive port number and the port
number of the port forwarding are unavailable.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110,
123, 161, 162, 443, 546, 547, 995, 10001, 10002,
10003, 10004, 10005, 10006, 10007,
50000~50255
[Easy IP Setup accommodate period]
Set time to enable operation of the network settings
from the dedicated software to 20 minutes or
unlimited from the launch of the recorder.
20 min: Enables operation to change the IP
address of the recorder from the dedicated
software for 20 minutes only after the launch
of the recorder.
Unlimited: Always enables operation to change
the IP address of the recorder from the
dedicated software.
Default:
20 min
[Back] button
Click this button after completing the settings.
[Setup via recorder's main monitor]
