53
[Fix the HDMI output to the following video mode]
Fixes the signal system of the HDMI output when it is
checked. The signal system is selectable from 4K and
1080p.
Note:
• 4K output is p/30Hz(4K/30p). Depending on your
monitor, "ERROR" may be displayed, but you can
still use this product without problems.
• Do not select "4K" unless a 4K monitor is
connected. Otherwise the monitor will display a
black screen or fail to return to the setup menu.
[Activate the time-saving playback]
Mark the checkbox to activate the time-saving
playback and play the recorded image up to 4 times
faster if there is no movement in the recorded image.
(For playback by the operation of the recorder)
(
☞
Important:
• To use the time-saving playback, a camera that
supports the motion detection information
addition function is required. For more information
about this function, refer to the Operating
Instructions of the camera.
Keep the aspect ratio for the full screen display
(Except during live sequence)
For "multiscreen select" of each wide view except for
live sequence, select whether to change the aspect
ratio of the displayed area if the aspect ratio of the
image is different from the displayed area.
Checked: Keeps aspect ratio (Does not change
the ratio automatically)
Not checked: Does not keep aspect ratio
(Changes the ratio automatically)
Default:
Not checked
[Back] button
Click the button after completing the settings. The
screen returns to the [Main monitor] tab.
[Setup via recorder's main monitor]
