23
4
Turn on the devices
Turn on the power of the recorder
Turn on the power of the recorder. First, turn on the power of the monitor.
Step 1
Connect the included power cord to the AC power
adapter, and insert the power plug to an outlet whose
rating is as follows.
100 V - 240 V AC, 50 Hz/60 Hz
→
The [OPERATE] indicator on the front of the recorder will
light, the system check will start, and the startup window
will be displayed on the main monitor.
Important:
• Never turn off the power of the recorder during startup.
• Insert the power cord fully into the power supply terminal
so that it will not loosen or come out.
• Fix the power cord firmly at 15 cm to 20 cm {5-7/8 to
7-7/8 inches} from the plug with the included cable
clamp (for DC cable) to prevent the cable from
unplugging.
Step 2
The administration registration window is displayed on
the main monitor.
Enter an administrator, a password and a password
confirmation following the instruction on the display, and
click [Registration].
Clicking [OK] on the displayed confirmation screen completes
the administration registration.
Important:
• Change the password periodically.
Precautions on storing the administrator name
and the password
If you forget the set administrator name and password,
you need to initialize* the recorder. Once the recorder
is initialized, all the settings are deleted. Keep informa-
tion on the administrator name and the password in a
safe place where nobody can see it except you.
* Contact your dealer for initializing.
