Rigging a BB1 Powerbar
To rig a Powerbar horizontally use the two OMEGA brackets supplied with the bar.
These would have your clamps of choice bolted on to them.
First place the camloc pins in the receptacles either on the top of the powerbar with the levers facing out
so that a quarter turn clockwise will have them facing in alternate directions as shown.
OPERATING INSTRUCTIONS - Page 6
⤵
⤵
⤵
⤵
Always secure the Powerbar to the truss,pipe e.t.c. with a safety bond, attached to the bar through the the
safety points on the top of the bar shown in green.
Always secure the BB1 to the Powerbar through the safety points on the bottom of the bar shown in green.
The Powerbar can also be rigged using a spigot as shown.
