i-onyx MP-955IR Operation Manual Download Page 1 | Manualshive

Page: 1 / 40

i-onyx MP-955IR Operation Manual Download Page 1

XX194-10-00

MP-955IR IP IR MEGAPIXEL

BULLET CAMERA

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your
requirements or that the operation will be entirely error free or perform precisely as described in the
documentation. This system has not been designed to be used in life-critical situations and must not
be used for this purpose.

Warning:

To prevent fire or shock hazard, do not expose the unit to rain

or moisture.

Copyright © 2008 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
ViconNet, Kollector, I-Onyx and their logos are registered trademarks of Vicon Industries Inc.

VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NY 11788

TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288)

TOLL FREE: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266)

UK: 44 (0) 1489-566300 WEB: www.vicon-cctv.com

Vicon part number 8009-8194-10-00 Rev 908 Section 1/3

1
2
3
...
»

Summary of Contents for MP-955IR









































Reviews:

No comments