Auto-Link-SPE-G User Manual
Rev. 1.6
2020-07-05
4 / 10
3
Scope of Delivery
•
Auto-Link-SPE-G (1000Base-T1 Media Converter)
•
T1 Network Connector Receptacle (Molex Mini50 4Pos)
•
Power Connector Receptacle (Molex Mini50 2Pos)
•
Terminals for the Mini50 Receptacles (4x AWG22 + 4x AWG24 + 4x AWG26-30)
4
Intended Purpose and Disclaimer
The Auto-Link-SPE-G is intended to be used for development and testing purposes in automotive or
industrial areas.
It is not allowed to use the Auto-Link-SPE-G in series products.
Warranty Exclusion: i-novative
®
GmbH does not take over any liability for damages resulting from
the use of the Auto-Link-SPE-G.
5
Connectors and Cables
5.1
1000BASE-T1 / 100BASE-T1 Connector
5.1.1
Receptacle Specification
5.1.2
Pin Assignment
5.1.3
T1 Cable Recommendation
For proper operation of the link, the used network cables and connectors for the T1 link must
comply to the specifications of the respective standards. Please refer to:
•
100BASE-T1:
“IEEE 802.3bw Clause 96.7”
•
1000BASE-T1:
“IEEE 802.3bp Clause 97.6”
Description
Vendor
Part Number Distributor Distributor Number
MINI50 4Pos Receptacle Opt A
Molex
347910040
Digi-Key
WM9381-ND
MINI50 4Pos Receptacle Opt A
Molex
347910140
Digi-Key
WM19983-ND
CTX50 Terminal L-Grip 22 AWG
Molex
5600230448
Digi-Key
WM16315CT-ND
CTX50 Terminal M-Grip 24 AWG
Molex
5600230421
Digi-Key
WM8745CT-ND
CTX50 Terminal S-Grip 26-30 AWG
Molex
5600230444
Digi-Key
WM25289CT-ND
Connector
Terminals
Pin
Signal
Remark
1
Shield
2
Data P
3
Data N
4
Shield