background image

28

Figure 22. Discard changes confirmation pop-up

If invalid or incomplete settings have been specified for at least 
one parameter, the button will be shown greyed out
 

and disabled until such settings have been corrected.

Any change made in the page will become effective only after 
the 

APPLY

 button has been clicked. 

Conversely, modifications can be discarded by leaving the page 
without clicking 

APPLY

: in that case, a pop-up windows will be 

displayed asking to confirm this action, contextually offering the 
possibility of reenter the configuration page (see Figure 22).

Some configuration changes require the router to be rebooted: 
in this case, a warning page will pop-up (See Figure 23) notify-
ing the need for such action and asking for a confirmation to 
proceed.

During reboot a progress bar will be shown with the indication 
of the approximate time remaining for completing the operation 
(see Figure 24).

When reboot terminates, a notification is issued and the user is 
redirected to home page and requested to login again. 

Figure 23. Reboot warning

Figure 24. Reboot ongoing

Summary of Contents for Thunder AX 3600



































































Reviews: