I-bus/Phoenix G8 User Manual Download Page 4 | Manualshive

Page: 4 / 48

I-bus/Phoenix G8 User Manual Download Page 4

G8 CPCI Enclosure User’s Guide

4

Dear Customer,

Thank you for purchasing an I-Bus/Phoenix product. We hope
that this product exceeds your expectations. It is our desire to pro-
vide you with accurate, up-to-date information about the
product(s) you have purchased. We welcome your comments and
suggestions about our manuals.

You may email those comments and suggestions to
[email protected]. Please be sure to include your name , the
name of your company, the product purchased and the manual
number/revision (ie. 00-00000-00 Rev. *). This number is located
on the title page.

At I-Bus/Phoenix, we value our customers and partners, and you
can continue to count on I-Bus/Phoenix to be customer focused
and to provide you a large range of solutions -- from cost-effec-
tive to fully customized industrial computer solutions.

Again, thank you for your commitment to I-Bus/Phoenix. We
appreciate your business and look forward to continuing to work
with you and helping you reach your goals.

«
...
2
3
4
5
6
...
»

Summary of Contents for G8

















































Reviews:

No comments