Hyundai VC 011, Instruction Manual, Page: 23 / 44

– Do not use the vacuum cleaner to vacuum dirt produced during/after construction such
as plasterboard dust, fine sand, cement, dust from construction, parts of plaster etc.
ACCESSORIES AND ASSEMBLY OF THE APPLIANCE:
– Do not put the suction nozzle or the tube end or accessories close to eyes and ears
and do not insert them into body orifices!
POWER CABLE:
– Check whether the data on the type label corresponds with the voltage in your socket.
The power cord plug may only be connected to the electrical socket complying with the
applicable standards.
–
If the power cord of the appliance is corrupted, it has to be replaced by
the manufacturer, its service technician or a similarly qualified person.
–
Always disconnect the appliance from power by unplugging
the power cord from the electrical socket, if the appliance is left
unattended and before assembly, disassembly or cleaning.
–
Never use the appliance if the power cord or power plug are
damaged, if the appliance is not correctly operating or if it has fallen
on the floor and been damaged, or if it has fallen into water.
– Do not apply force to unwind the cord beyond the red mark.
– Do not unplug the power plug by pulling the power cord or the vacuum cleaner unit.
– When winding the cord, hold the plug to prevent lashing of the cord around and to prevent
possible injury.
– The power cord must not be damaged with sharp or hot objects, open fire, it must
not be sunk into water or bent over sharp edges.
– Check the condition of the power cord of the appliance regularly.
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – ON/OFF ( ) button
A2 – power cord winding button
A3 – suction vent
A4 – lid
A5 – lid lock
A6 – handle
A7 – depression for attachment of accessories
A8 – full filter signaling
A9 – power cord
A10 – rear wheels
A11 – plastic fixture for the dustbag
A12 – dust bag
A13 – input filter
A14 – exhaust grid + output HEPA filter
B – accessories
B1 – universal floor nozzle with retractable
brush
B2 – brush
B3 – crevice nozzle
B4 – suction hose
B5 – mechanical suction power regulator
B6 – suction tube
B7 – telescopic suction tube locking
III. VACUUM CLEANER PREPARATION
Remove all packing material, take out the vacuum cleaner and the accessories.
Remove all possible adhesion foils, stick-on labels or paper from the appliance.
GB
23 / 39